EMI Conductive Form-In-Place Gaskets
This selector guide lists seven EMI shielding Form In Place “FIP’ gasket materials. They provide the lowest total cost of ownership for small cross section and complex pattern applications, Parker Chomerics CHOFORM and ParPHorm FIP materials can reduce installed cost of an EMI gasket by up to 60%.
- >60 dB shielding effectiveness 200 MHz to 12 GHz
- Electrical conductivity as low as .003 ohm-cm
- Lower deflection forces and a broad deflection range
This selector guide lists seven EMI shielding Form In Place “FIP’ gasket materials. They provide the lowest total cost of ownership for small cross section and complex pattern applications, Parker Chomerics CHOFORM and ParPHorm FIP materials can reduce installed cost of an EMI gasket by up to 60%.
A range of conductive particle technologies combined with thermoset and RTV silicone systems provide a material selection for most opportunities. Multiple filler grades balance material cost versus performance and can provide low cost alternatives for less demanding applications. Chomerics corrosion resistant materials inherently provide protection against galvanic activity. They may eliminate the need for nickel or tin plating and or secondary environmental gaskets. Chomerics general purpose materials exhibit excellent electrical and mechanical properties on metallic and shielded plastic housings. Chomerics silver fi lled materials provide high shielding and conductivity critical for inter-compartmental shielding.
CHOFORM delivers a greater defl ection range, lower defl ection forces & improved reliability. FIP materials are available in both uncured bulk form and dispensed onto housings. We can reduce costs by material selection, design, dispense technique and supply chain management. Let us work with you in the design phase to avoid unnecessary manufacturing costs.
Product Features:
- >60 dB shielding effectiveness 200 MHz to 12 GHz
- Electrical conductivity as low as .003 ohm-cm
- Lower defl ection forces and a broad defl ection range
- Corrosion resistant materials can eliminate plating or secondary environmental gasket
- Good adhesion to many substrates
- UL 94 V-0 (as tested by Chomerics), RoHS compliant and halogen free materials
- Supply chain management providing ongoing logistics
- Low cost and rapid prototyping
The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
Value-Added Capabilities
Supply Chain
Management We will coordinate with the housing supplier or can provide in-house injection molding to ensure ontime delivery. We will do secondary assembly of components, labeling, pad printing, painting. Our management will provide one supplier responsible for on time delivery of a quality part.
| North America Division HeadquartersWoburn, MAPhone +1 781-935-4850Fax +781-933-4318chomailbox@parker.com |
EuropeHigh Wycombe, UKPhone +44 1494 455400Fax +44 14944 55466chomerics_europe@parker.com | Asia PacificHong KongPhone +852 2428 8008Fax +852 2786 3446chomerics_ap@parker.com |
Cranford, NJ
Phone +1 908-272-5500
Fax + 1 908-272-2741
Manufacturing Facilities
Woburn, MA; Hudson, NH; Cranford, NJ ; Millville, NJ; Fairport, NY; Grantham, UK; Saint Ouen l’Aumone, France; Beijing, Shanghai, Shenzhen, and Tianjin, China; Guadalajara and Monterrey, Mexico; Sadska, Czech Republic; Chennai, India; Selangor, Malaysia.
This warranty comprises the sole and entire warranty pertaining to items provided hereunder. seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other warranties, including but not limited to, merchant ability and fitness for purpose, whether expressed, implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed. Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or partially, to buyer’s designs or specifications.
Limitation of remedy: Seller’s Liability arising from or in any way connected with the items sold or this contract shall be limited exclusively to repair or replacement of the items sold or refund of the purchase price paid by buyer, at seller’s sole option. In no event shall seller be liable for any incidental, consequential or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether alleged to arise from breach of contract, expressed or implied warranty, or in tort, including without limitation, negligence, failure to warn or strict liability.
- Details
-
This selector guide lists seven EMI shielding Form In Place “FIP’ gasket materials. They provide the lowest total cost of ownership for small cross section and complex pattern applications, Parker Chomerics CHOFORM and ParPHorm FIP materials can reduce installed cost of an EMI gasket by up to 60%.
A range of conductive particle technologies combined with thermoset and RTV silicone systems provide a material selection for most opportunities. Multiple filler grades balance material cost versus performance and can provide low cost alternatives for less demanding applications. Chomerics corrosion resistant materials inherently provide protection against galvanic activity. They may eliminate the need for nickel or tin plating and or secondary environmental gaskets. Chomerics general purpose materials exhibit excellent electrical and mechanical properties on metallic and shielded plastic housings. Chomerics silver fi lled materials provide high shielding and conductivity critical for inter-compartmental shielding.
CHOFORM delivers a greater defl ection range, lower defl ection forces & improved reliability. FIP materials are available in both uncured bulk form and dispensed onto housings. We can reduce costs by material selection, design, dispense technique and supply chain management. Let us work with you in the design phase to avoid unnecessary manufacturing costs.
- Specs
-
Product Features:
- >60 dB shielding effectiveness 200 MHz to 12 GHz
- Electrical conductivity as low as .003 ohm-cm
- Lower defl ection forces and a broad defl ection range
- Corrosion resistant materials can eliminate plating or secondary environmental gasket
- Good adhesion to many substrates
- UL 94 V-0 (as tested by Chomerics), RoHS compliant and halogen free materials
- Supply chain management providing ongoing logistics
- Low cost and rapid prototyping
The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
Value-Added Capabilities
Supply Chain
Management We will coordinate with the housing supplier or can provide in-house injection molding to ensure ontime delivery. We will do secondary assembly of components, labeling, pad printing, painting. Our management will provide one supplier responsible for on time delivery of a quality part.
North America
Division HeadquartersWoburn, MAPhone +1 781-935-4850Fax +781-933-4318chomailbox@parker.comEuropeHigh Wycombe, UKPhone +44 1494 455400Fax +44 14944 55466chomerics_europe@parker.com Asia PacificHong KongPhone +852 2428 8008Fax +852 2786 3446chomerics_ap@parker.com Cranford, NJ
Phone +1 908-272-5500
Fax + 1 908-272-2741Manufacturing Facilities
Woburn, MA; Hudson, NH; Cranford, NJ ; Millville, NJ; Fairport, NY; Grantham, UK; Saint Ouen l’Aumone, France; Beijing, Shanghai, Shenzhen, and Tianjin, China; Guadalajara and Monterrey, Mexico; Sadska, Czech Republic; Chennai, India; Selangor, Malaysia.
- Resources
- Warranty
-
This warranty comprises the sole and entire warranty pertaining to items provided hereunder. seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other warranties, including but not limited to, merchant ability and fitness for purpose, whether expressed, implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed. Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or partially, to buyer’s designs or specifications.
Limitation of remedy: Seller’s Liability arising from or in any way connected with the items sold or this contract shall be limited exclusively to repair or replacement of the items sold or refund of the purchase price paid by buyer, at seller’s sole option. In no event shall seller be liable for any incidental, consequential or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether alleged to arise from breach of contract, expressed or implied warranty, or in tort, including without limitation, negligence, failure to warn or strict liability.
