Metalastic & Porcupine Metalastic EMI Gasketing with Pressure Seal
Parker Chomerics METALASTIC gasketing is a composite EMI and pressure seal in thin sheet form. Shielding is provided by a woven aluminum mesh, and pressure sealing is achieved by neoprene, silicone or fluorosilicone elastomer impregnated in the mesh.
PORCUPINE METALASTIC is available in two forms: EMI shielding with pressure seal filled and EMI shielding only (un-filled). Shielding is provided by severely expanded Monel or Aluminum foil. For composite shielding and pressure sealing, the expanded Monel is filled with a silicone or fluorosilicone elastomer. The material gains its excellent compressibility from very uniform thickness. The expanded Monel provides dozens of contact points per square inch of surface area, assuring moderate shielding effectiveness.
METALASTIC
EMI Gasketing with Pressure Seal
Parker Chomerics METALASTIC gasketing is a composite EMI and pressure seal in thin sheet form. Shielding is provided by a woven aluminum mesh, and pressure sealing is achieved by neoprene, silicone or fluorosilicone elastomer impregnated in the mesh.METALASTIC gasketing is intended for use only in applications in which joint unevenness is less than 0.002 in. (0.05 mm), and/or where space is severely limited. The material can be easily cut into gaskets of intricate shapes, and is available with a minimum nominal thickness of 0.016 in. (0.40 mm). These gaskets are not intended to be re-used after joints are opened.
PORCUPINE METALASTIC
EMI Gasketing with Pressure Seal
PORCUPINE METALASTIC is available in two forms: EMI shielding with pressure seal filled and EMI shielding only (un-filled). Shielding is provided by severely expanded Monel or Aluminum foil. For composite shielding and pressure sealing, the expanded Monel is filled with a silicone or fluorosilicone elastomer. The material gains its excellent compressibility from very uniform thickness. The expanded Monel provides dozens of contact points per square inch of surface area, assuring moderate shielding effectiveness.PORCUPINE METALASTIC gasketing is intended for applications in which joint unevenness is less than 0.003 in. (0.08 mm) and where the gasket must be less than 4 x 6 in. (102 x 152 mm). These gaskets are not intended to be re-used after Contact Information: joints are opened.
Ordering Information
Sheet gasketing: Order by part number from Table 1 or 2. All METALASTIC sheets are 8.0 in. wide (20.32 cm), and PORCUPINE METALASTIC sheets are 12 in. (30.4 cm) wide. Both are supplied in continuous lengths. Custom diecut gaskets: Specify material from the table by part number and submit a drawing. For gaskets exceeding standard width, a miter or ovetail joint is recommended. For additional assistance, contact Parker Chomerics Applications Engineering Department.
This warranty comprises the sole and entire warranty pertaining to items provided hereunder. seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other warranties, including but not limited to, merchant ability and fitness for purpose, whether expressed, implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed. Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or partially, to buyer’s designs or specifications.
Limitation of remedy: Seller’s Liability arising from or in any way connected with the items sold or this contract shall be limited exclusively to repair or replacement of the items sold or refund of the purchase price paid by buyer, at seller’s sole option. In no event shall seller be liable for any incidental, consequential or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether alleged to arise from breach of contract, expressed or implied warranty, or in tort, including without limitation, negligence, failure to warn or strict liability.
- Details
-
METALASTIC
EMI Gasketing with Pressure Seal
Parker Chomerics METALASTIC gasketing is a composite EMI and pressure seal in thin sheet form. Shielding is provided by a woven aluminum mesh, and pressure sealing is achieved by neoprene, silicone or fluorosilicone elastomer impregnated in the mesh.METALASTIC gasketing is intended for use only in applications in which joint unevenness is less than 0.002 in. (0.05 mm), and/or where space is severely limited. The material can be easily cut into gaskets of intricate shapes, and is available with a minimum nominal thickness of 0.016 in. (0.40 mm). These gaskets are not intended to be re-used after joints are opened.PORCUPINE METALASTIC
EMI Gasketing with Pressure Seal
PORCUPINE METALASTIC is available in two forms: EMI shielding with pressure seal filled and EMI shielding only (un-filled). Shielding is provided by severely expanded Monel or Aluminum foil. For composite shielding and pressure sealing, the expanded Monel is filled with a silicone or fluorosilicone elastomer. The material gains its excellent compressibility from very uniform thickness. The expanded Monel provides dozens of contact points per square inch of surface area, assuring moderate shielding effectiveness.PORCUPINE METALASTIC gasketing is intended for applications in which joint unevenness is less than 0.003 in. (0.08 mm) and where the gasket must be less than 4 x 6 in. (102 x 152 mm). These gaskets are not intended to be re-used after Contact Information: joints are opened. - Specs
-
Ordering Information
Sheet gasketing: Order by part number from Table 1 or 2. All METALASTIC sheets are 8.0 in. wide (20.32 cm), and PORCUPINE METALASTIC sheets are 12 in. (30.4 cm) wide. Both are supplied in continuous lengths. Custom diecut gaskets: Specify material from the table by part number and submit a drawing. For gaskets exceeding standard width, a miter or ovetail joint is recommended. For additional assistance, contact Parker Chomerics Applications Engineering Department.
- Resources
- Warranty
-
This warranty comprises the sole and entire warranty pertaining to items provided hereunder. seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other warranties, including but not limited to, merchant ability and fitness for purpose, whether expressed, implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed. Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or partially, to buyer’s designs or specifications.
Limitation of remedy: Seller’s Liability arising from or in any way connected with the items sold or this contract shall be limited exclusively to repair or replacement of the items sold or refund of the purchase price paid by buyer, at seller’s sole option. In no event shall seller be liable for any incidental, consequential or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether alleged to arise from breach of contract, expressed or implied warranty, or in tort, including without limitation, negligence, failure to warn or strict liability.
